ML-200G Green Line Generator

New Generation Green Line Generator - Ideal for cutting works

Operating Temperature Range: -4 °F to 140 °F (-20 °C to +60 °C)

Product details

Direct Green Laser Diode: new revolution in green laser technology
Operating Temperature Range: -4 °F to 140 °F (-20 °C to +60 °C).
The new revolution in green laser technology provides excellent stability even at extreme temperatures!
In the past, the bad news for green laser modules is that green lasers are more sensitive to extreme temperatures than red lasers. People once thought that green lasers were meant to perform poorly at low and high temperatures, but not anymore. If you try this non-DPSS green laser module, you will find out that our green lasers have excellent stability even at extreme temperatures.

Industrial use Laser modules have 10,000 hours working life.
Direct Green Line Laser - for positioning, measuring, pointing and laser sighting device.
Wood processing.
Metal processing.
Stone processing.
Textile industry.
Food industry.
Automotive industry.
Medical science.

Adjustable Green Line Generator. 
Operating Temperature Range: -4 °F to 140 °F (-20 °C to +60 °C).
Wavelength : 520 nm.
Output power (Center/Total) in Japan and Europe: Class II – less than 1mW / 2.5mW.
Output power (Center/Total) in U.S.: Class IIIa – less than 5mW / 20mW.
Dimensions: 4.88"(L) x 2.13" (W) x 2.32" (H) ( 124 x 54 x 59 mm )
Weight: 10 oz.
Laser line accuracy : less than 3mm at 5 meters.
Emitting angle: more than 120°.
Housing: Metal. Finishing: Black anodized.
Integrated quartz cylindrical lens, collimating lens, laser diode, and APC driver circuit.
APC Driver Circuit enables the Laser output power safe and constant.

Our products are also sold on Digi-Key Online Shop. => Click Here <= to buy from Digi-Key.

Quarton inc. places emphasis on laser safety
About APC (automatic power control) circuit:
The Laser output power must be stable especially in safety reason.
But the Laser power is related to the Junction Temperature (Tj) of the LD.
It means that as the different Tj, the Laser power will be increased or decreased.
An APC (automatic power control) circuit is used to compensate the varying Laser output power to constant.
As shown in the picture,
The principle of the APC circuit is monitoring portion of the laser light from the LD by the built-in PD,
and real-time feedback to control the laser output power constant and safety.